Components
Model JXW500 Section Material Bender mainly consists of welded machine frame, forming rollers, work piece supporters, hydraulic system, roller supporting equipment, control system, etc.
Basic Parameters
 |
 |
| Bending
section material |
Engineering
practice examples |
1.Bending-resistance
modulus of section: 270-2000cm3
2.Max. resistance of material: 245Mpa (as Q235A)
3.Channel steel outward bending: Model of channel steel: 50#
Min. bending diameter:ø4000mm
4.Channel steel inward bending: Model of channel steel: 40#
Min. bending diameter:ø4000mm
5.Steel
tubing: Max. Section:ø426mm¡Á16mm
Min.bending diameter:ø18000mm
Min. Section;ø200mm¡Á10mm
Min. bending diameter:ø3500mm
6.Band steel flat bending: Max. Section: 500mm¡Á75mm
Min. Bending diameter:ø3500mm
7.Band steel upright bending: Max. Section:200mm¡Á60mm
Min. Bending diameter:ø5000mm
8.Working
speed: 2-3M/min
9.Motor
power: Oil pump: 22KW 1470rpm
Roller supporter: 0.75KW¡Á2 0.18KW¡Á2
10.Dimension:4880mm¡Á3200mm¡Á2000mm (Length¡Áwidth¡Áheight)
11.Total
weight: About 32000kg
Application
Model
JXW500 Section Material Bender is used to make circle, curve, or
spiral for work pieces. It is widely used in such fields as petroleum
industry, chemical engineering, hydroelectricity, shipbuilding,
steel structure, machine making and so on.
|
