Thin-walled Steel Cylinder Spiral Welding Machine produces varies of spiral tube equipments .Being adapted the spiral automatic continues welding,after cutting to length in automatic then transmit steel pipe to stacking place. The steel Cylinder, supporting and faucet ring is assembled and welding through CCH60-120 supporting and faucet welding machine.

The raw material uses coil steel plate, sending out steel plate through discharge car,then makes the diameter of steel cylinder,also adjustment the angle of discharging car,then send steel plate three-rolled coil trigger,after that adjustment the location of fluctuating formation roller which is matched with formatting diameter.During the steel cylinder formation,by using submerged arc-welding for continuing automatic welding,and in ther process of transmission,cut to length for ensuring high efficiency.

The features of ?Thin-walled Steel Cylinder Spiral welding machine : fast welding, good efficient, flatten welding line and smooth,automatization. During the process of welding,it can change the welding speed random.All sets take small areas and saves a great lot of land resources charges.

Thin-walled Steel Cylinder Spiral Welding Machine
 Technical Parameters:
a    Being fitted to produce the spiral tube machine    
Diameter ---   600~1200mm
b    Being fitted to produce the spiral tube machine
     Length  ---    2500~6000mm
c    The width of coil steel plate:     1000mm
d    The thickness of coil steel plate:  1.2~1.5mm
e    The specifications of coil steel plate
 inner diameter   :   ﹥600mm
 Outer diameter:   ＜1600mm
 Weight        :   ＜10 T
f    The velocity  :   0.5~ 2.5m/min
g    Way to produce  :   Making by coils、Welding、Cutting continues
h    Working pressure:  0.7Mpa
i    Capacity        :  ~ 50 kw
j    Power           :   AC 280V 50HZ

⑵ Mainly structure:
The discharge car consist of discharging equipment, oriented roll, prima adjustment roll, welding table, folder equipment, tension equipment, flatten equipment, delivery equipment, BHF, Fixing roll block, ajustment roll block, frame , position , supporting, stepped wheel, swinging? bracket etc.The discharging car can go around the fixing ream shaft also swings to certain angle,steel plate coil can place the plate up according to the given speed.

Three-rolled coil trigger cosists of frame, upper-roller fixing frame, upper-roller moving frame, below ?fixing frame , fluctuate formation roll.The steel plate roll out of diameter through fluctuate formation roll.For satisfying all kinds of different steel cylinder,it can adjustment fluctuate formation roll,also it reserves welding position in joints of steel cylinder.

Welding equipment consist of frame, automatic tracing stucture, automatic submerged arc-welding system and Flux automatic recycling equipment,carry through automatic tracing and continues welding in the joins of steel cylinder. The transportation and cutting equipment consist of all kinds of roll, cutting structure, pneumatic double pipe structure,goes on automatic speediness cutting according to length setted when made out of steel cylinder that finished,then roll to stacking place.